The Dos and Don’ts of Arc Flash PPE Maintenance
If you’ve ever purchased arc flash personal protective equipment (PPE), you know that it isn’t exactly an inexpensive purchase. But this is because of the highly engineered materials used, the extensive testing required and the fact that the gear has the ability to protect workers when exposed to a potentially devastating arc flash it is a justified, essential expense.
Due to this large expense, it is common practice for companies to share PPE, as most companies cannot justify purchasing each worker their own personal gear, especially if they only work on high voltage equipment occasionally.
In this COVID-19 world, an emphasis on cleanliness and hygiene is of utmost importance to companies and employees alike. But, how do companies keep their shared arc flash PPE clean and safe for workers.
Arc Flash Suits
According to the Safe Work Australia recommendations, washing on a regular cycle wash using the warmest possible setting with normal mild washing detergent is one of the best ways to prevent the spread of COVID-19, but to also seek advice from the manufacturers. Product care information for all Elliotts arc flash PPE products can be found on the information labels sewn into your garment.
Whilst washing is the most effective way of cleaning your arc flash PPE, it is not really the most practical solution for on-the-job sanitation. Companies may look to using disinfecting sprays and wipes to clean their arc flash PPE, but it is not recommended for multiple reasons. Disinfecting sprays are not intended to be used on soft, porous materials so the intended level of saturation and cleanliness cannot be achieved. Additionally, many of the chemicals used to manufacture these sprays include potentially flammable liquids, which may leave a residue, even when dry – which ultimately will negatively impact the garment’s ability to protect the wearer.
The material that covers the hood will still need to be maintained as above, but the actual face shield can be cleaned and disinfected quite easily. Simply disassemble the hood, flush off the dirt and grit with room temperature water and use a soft clean cloth to wipe and gently clean both sides of the shield.
The Elliotts Difference
For over 50 years, Elliotts has been innovating and designing new products to meet the needs of our customers, and our brand new X50 Arc Flash range is the ‘what’s next’ in arc flash protection. The range includes; the new state-of-the-art Lift Front hood as well as a traditional arc flash hood which both include the new grey-coloured highly transparent face shield which allows full colour recognition. The range doesn’t stop at hoods, the X50 range also includes a Jacket and Trouser or Coat and legging combinations, both available with and without Reflective Trim.
If you’d like to learn more about our safety products or need some expert advice on which safety gear to get for your needs, feel free to get in contact with us at Elliotts Australia. We would love to assist you! Call us on 07 3265 2944 or send us a message – HERE.
Connect with us on: